|
 |
Sirijaya Industries Sdn Bhd
|
|
 Electric Supplies - Wholesalers
|
Bare Type Fitting
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid exposing bare type for optimized directional light control. Mainly used for supermarkets, factories and assembly lines.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 105 Celsius.
Ballast : Polyester Va
... more
|
|
Channel Fitting
This quality fitting is designed for ceiling, wall or pendant mounting using suspension system where control of illumination is minimal. Mainly used for economical industries and domestic lighting.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W, 36/40W and 58/65W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 105 celsius.
Ballast : Polyester Vacuu
... more
|
|
Channel Fitting
This quality fitting is designed for ceiling and pendant mounting using suspension system with a symmetrical or asymmetrical mirror or metal reflector where directional lighting are needed as certain area. Mainly used for workshops, work areas and production lines.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W, 36/40W and 58/65W.
Electrical Data : 240V, 50H
... more
|
|
Channel Fitting
This quality fitting is designed for direct mounting ceiling or pendant mounting using suspension system with symmetrical aluminium or metal reflector, which offer a wide efficient distribution of light. Mainly used in corridors, carparks and garages.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 10
... more
|
|
Corrosive Resistant Fitting
This quality fitting is designed for IP65 series for the excessive dust, humidity and corrosive elements application. Mainly used in workshops, laboratories, loading bays and chemical stores.
Body : Made of Polyester Reinforcer with fiberglass.
Diffuser : Prismatic type, made of clear acrylic / polycarbonate material.
Light Source : Fluorescent TLD lamp of 18/20W, 36/40W and 58/65W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 105 Celsius.
Ballast : Polyester Vacuum Impregnated.
... more
|
|
Daikon Diffuser Fitting
This quality diffuser fitting is designed for ceiling, wall and pendant using suspension system which offer a low luminance with an even and gently diffuse light output. Mainly use for general lighting indoor and outdoor like corridors and stairways application.
Body : Made of heavy gauge sheet steel.
Diffuser : Wide choice of diffuser type for selection.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 1
... more
|
|
Diffuser Type Fitting
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid with a prismatic diffuser which offer a low luminance and provides a gently and even light distribution. Mainly used for general lighting in offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power
... more
|
|
Diffuser Type Fitting
This quality fitting is designed for direct mounting to ceiling with a prismatic diffuser which offer a low luminance and provides a gently and even light distribution. Mainly used for general lighting in offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 10
... more
|
|
Diffuser Type Fitting
This quality fitting is designed for direct recess mounting to wood or plaster ceiling with a prismatic diffuser which offer a low luminance and provides a gently and even light distribution. Mainly used for general lighting in offices and supermarkets.
Body : Made of heavy gauge sheet steel.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
... more
|
|
Diffuser Type Fitting
This quality fitting is designed for recess on tee-bar suspension ceiling grid or direct mounting to wood or plaster ceiling with a prismatic diffuser offer a good degree of protection against dust or squash and badminton court protection which offer a low luminance and provides a gently and even light distribution. Mainly used for general lighting in technical workshop, laboratories, offices and supermarkets.
Body : Made of heavy gauge sheet steel.
Diffuser : Wide choice of diffuser type for
... more
|
|
Double Parabolic Louver Ftg.
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid with symmetrical louver of 16 cells version for the restricted critical angles where VDT's are used. Mainly used for general lighting on offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Louver : Anodised aluminium in either specular or matt finish.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Compact Fluorescen
... more
|
|
Double Parabolic Louver Ftg.
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid and direct mounting on wood and plaster ceiling with wide choice of optics ensure optimum performance for areas where VDT's are used. Fully complied with CIBSE LG3 Category 2. Mainly used for general lighting in offices, schools, commercial buildings and libraries.
Body : Made of heavy gauge sheet steel.
Louver : High quality specular anodised aluminium.
Paintwork : Fully coated with a high gloss white ep
... more
|
|
Double Parabolic Louver Ftg.
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid with air supply outlet circulation and with symmetrical or double parabolic louver of 16 cells version for the restricted critical angles where VDT's are used. Fully complied with CIBSE LG3 Category 2. Mainly used for general lighting in offices, schools, commercial buildings and libraries.
Body : Made of heavy gauge sheet steel.
Louver : High quality specular anodised aluminium.
Paintwork : Fully coated
... more
|
|
Double Parabolic Louver Ftg.
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid and direct mounting on wood and plaster ceiling with wide choice of optics ensure optimum performance for areas where VDT's are used. Fully complied with CIBSE LG3 Category 2. Mainly used for general lighting in offices, schools, commercial buildings and libraries.
Body : Made of heavy gauge sheet steel.
Louver : High quality specular anodised aluminium.
Paintwork : Fully coated with a high gloss white epo
... more
|
|
Fluo. Starter Holder S-310
Material : Polycarbonate (Body),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 3g,
Packing Unit : 2500 pcs
... more
|
|
Fluo. Starter Holder S-320
Material : Polycarbonate (Body),
Contacts : Phosphor Bronze,
Nominal Rating 2A, 250V,
Weight : 3g,
Packing Unit : 2500 pcs
... more
|
|
Fluo. Starter Holder S-321
Material : Polycarbonate (Body),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 3g,
Packing Unit : 2500 pcs
... more
|
|
Fluo. Starter Holder S-400
Material : Polycarbonate (Body),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 4g,
Packing Unit : 1000 pcs
... more
|
|
Fluo. Twin Lamp Holder S-510
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight :20g,
Packing Unit : 300 pcs
... more
|
|
Fluo. Twin Lamp Holder S-520
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 20g,
Packing Unit : 300 pcs
... more
|
|
Fluo. Twin Lamp Holder S-531
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 5g,
Packing Unit : 2000 pcs
... more
|
|
Fluorescent Lamp Holder S-110
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 7g,
Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-111
Material : Polycarbonate (Body), PBT (Rotor), Contacts : Phosphor Bronze, Nominal Rating : 2A, 250V, Weight : 6g, Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-120
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 8g,
Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-200
Material : Polycarbonate (Body), PBT (Rotor), Contacts : Phosphor Bronze, Nominal Rating : 2A, 250V, Weight : 8g, Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-610
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight: 5g,
Packing Unit : 2000 pcs
... more
|
|
Fluorescent Lamp Holder S-611
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight: 5g,
Packing Unit : 2000 pcs
... more
|
|
Fluorescent Lamp Holder S-620
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 6g,
Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-710
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze
Nominal Rating : 2A, 250V,
Weight : 8g,
Packing Unit : 1000 pcs
... more
|
|
Fluorescent Lamp Holder S-720
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze,
Nominal Rating : 2A, 250V,
Weight : 9g,
Packing Unit : 800 pcs
... more
|
|
Fluorescent Lamp Holder S-800
Material : Polycarbonate (Body), PBT (Rotor),
Contacts : Phosphor Bronze
Nominal Rating : 2A, 250V,
Weight : 5g,
Packing Unit : 3000 pcs
... more
|
|
Mirror Optic Louver Fitting
This quality fitting is designed for recess mounting on tee-bar suspension ceiling grid with parabolic mirror optic louver for maximum lighting efficiency, even light distribution and glare control. Mainly used for general lighting in offices and supermarkets.
Body : Made of heavy gauge sheet steel.
Louver : Anodised aluminium in either specular, semi specular or matt finish with profile cross blades.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient fi
... more
|
|
Mirror Optic Louver Fitting
This quality fitting is designed for direct mounting to ceiling with parabolic mirror optic louver for maximum lighting efficiency, even light distribution and glare control. Mainly used for general lighting in offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Louver : Anodised aluminium in either specular, semi specular or matt finish with profile cross blades.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light
... more
|
|
Mirror Optic Louver Fitting
This quality fitting is designed for direct recess mounting on wood or plaster ceiling with parabolic mirror optic louver for maximum lighting efficiency, even light distribution and glare control. Mainly used for general lighting in offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Louver : Anodised aluminium in either specular, semi specular or matt finish with profile cross blades.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving res
... more
|
|
Mirror Optic Louver Fitting
This quality fitting is designed for recess mounting with parabolic mirror optics louver for the air supply outlet circulation and glare control to appear uniformly bright. Mainly used for general lighting in offices, supermarkets and complexes.
Body : Made of heavy gauge sheet steel.
Louver : Anodised aluminium in either specular, semi specular or matt finish with profile cross blades or v blades.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finis
... more
|
|
Radius Design Fitting
This quality fitting is designed for direct mounting to ceiling with mirror optic louver and prismatic diffuser which provides an attractive slim type offering a maximum lighting efficiency, even light distribution and glare control. Mainly used for general lighting in hotels, government buildings, offices and complexes.
Body (Base) : Made of heavy gauge sheet steel.
Body (Side) : Extruded aluminium.
Louver : High quality anodised aluminium in either specular, semi specular or matt finish wit
... more
|
|
Radius Design Fitting
This quality fitting is designed for surface mounted with asymmetrical mirror reflector for directional of light are needed as certain area. Mainly used for general lighting in hotels, government buildings, schools, offices and complexes.
Body (Base) : Made of heavy gauge sheet steel.
Body (Side) : Extruded aluminium.
Reflector : High quality anodised aluminium in either specular, semi specular or matt finish.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving re
... more
|
|
Wire Guard Fitting
This quality fitting is designed for ceiling and wall mounting with rugged metal guard for prevention against vandalism. Mainly used in public places like hallways, washrooms and stairways.
Body : Made of heavy gauge sheet steel.
Guard : Perforated metal piece.
Paintwork : Fully coated with a high gloss white epoxy polyester powder, giving resilient finish.
Light Source : Fluorescent TLD lamp of 18/20W and 36/40W.
Electrical Data : 240V, 50Hz, Power Factor 0.9.
Wire : HR 105 Celsius.
Ballas
... more
|
|
|
|
|
|
|
| Company Name |
Sirijaya Industries Sdn Bhd |
| Address |
No.9, Persiaran Perusahaan Kledang Utara 1/4, Kawasan Perindustrian Chandan Raya, Menglembu, 31450 Ipoh, Perak, Malaysia |
| Phone |
6-012-5005522 |
| Fax |
6-05-2823886 |
| Homepage |
http://www.sirijaya.com
|
| Contact |
Liew Kok Kian |
|
|
|
|
|
|