|
 |
Thong Fatt Jaya Machinery Hardware Sdn Bhd
|
|
 Waste,Sewerage-Construction/Mining
AD0102 Air Double Diaphragm Pump-T |
|
|
Brand: STLONG
Type: Air-Operated Double Diaphragm Pump
Model: T Series
(1)AIR DISTRIBUTION SYSTEM:
The STLONG air distribution system consists of a ported air valve body which houses a piston. This piston is the only moving component of the air distribution system. The system operates off of differential pressure only, there are no mechanical trip rods, bearings or springs to wear or repair. The air valve attaches to a center block which has matching ports. As air is supplied to the air valve, differential pressure causes the piston to move up and down vertically. The vertical movement alternately supplies power ports with pressurized air. The ports then direct the air to the back side of the diaphragm. Air valve tolerances allow for the passage of some moisture and air line particulates allowing free movement of the piston. All air valve components can be inspected without disassembling the pump.
(2)APPLICATIONS
* Chemical, Petrochemical & Hydrocarbon Processing
* Paints, Inks & Resins
* Solvent Recovery
* Slurry Transfer
* Waste Water / Pollution Control
* Mining / Construction
* Food, Beverage & Pharmaceutical
* Dry Powder Transfer
(3)SELF-PRIMING APPLICATION
Pumps range in suction lift capability from 4.5ft~21ft (1.37m~6.4m) dry. 25ft (7.62m) can be reached in a primed condition. Suction lift will vary according to materials of construction and application parameters. All data is based on pumping water at 20oC.
(4)SUBMERGED APPLICATION
All pumps are completely submersible. Air exhaust must be plumbed above liquid level and materials of construction must be compatible with surrounding liquid.
(5)POSITIVE SUCTION HEAD APPLICATION
Used extensively for drawing off the bottom of holding tanks, clarifiers, etc. Pumps operate most efficiently when inlet pressure is limited to 7~10psi (0.48~0.68bar).
(6) Working Conditions:
-Capacity: up to 30m3/h
-Head: up to 70m
-Flange Size: 1/2"~4"
|
|
... click to download specification details
|
|
|
|
|
|
|
|
| Company Name |
Thong Fatt Jaya Machinery Hardware Sdn Bhd |
| Address |
707-709, Jalan Kuala Kangsar, Taman Tasek Jaya,, 31400 Ipoh, Perak, Malaysia |
| Phone |
6-05-5468659 |
| Fax |
6-05-5474753 |
| Homepage |
http://www.thongfattjaya.com.my
|
| Contact |
Liew Chee Ching |
|
|
|
|
|